Create Macos El Capitan Bootable Usb

Create Macos El Capitan Bootable Usb Windows 7
Bootable Flash Drive Creator
Create Macos El Capitan Bootable Usb From Windows

It was 2009 when Apple last released a new operating system on physical media. Things have proceeded remarkably smoothly since version 10.7 switched to download-only installers, but there are still good reasons to want an old, reliable USB stick. For instance, if you find yourself doing multiple installs, a USB drive may be faster than multiple downloads (especially if you use a USB 3.0 drive). Or maybe you need a recovery disk for older Macs that don't support the Internet Recovery feature. Whatever the reason, you're in luck, because it's not hard to make one.

How to create USB installation flash drive with OS X 10.11 El Capitan with createinstallmedia, Terminal, Finder and DiskMaker X applications. As usual, Apple no longer supply a bootable USB Flash Drive with latest OS X releases - including the new OS X 10.11 El Capitan. Using this tutorial you will. Banglazed said: For simplicity, download the El Capitan, rename flash drive to ElCapInstaller, enter that above into terminal and boom done. Don’t need to format the USB since the command used in the terminal will format and create the bootable USB.

As with last year, there are two ways to get it done. There's the super easy way with the graphical user interface and the only slightly less easy way that requires some light Terminal use. Here's what you need to get started.

A Mac that you have administrator access to, duh. We've created El Capitan USB stick from both Yosemite and El Capitan, but your experience with other versions may vary.
An 8GB or larger USB flash drive or an 8GB or larger partition on some other kind of external drive. For newer Macs, use a USB 3.0 drive—it makes things significantly faster.
The OS X 10.11 El Capitan installer from the Mac App Store in your Applications folder. The installer will delete itself when you install the operating system, but it can be re-downloaded if necessary.
If you want a GUI, you need the latest version of Diskmaker X app. Version 5 is the one with official El Capitan support.
Diskmaker X is free to download, but the creator accepts donations if you want to support his efforts.

The easy way

Once you've obtained all of the necessary materials, connect the USB drive to your Mac and run the Diskmaker X app. The app will offer to make installers for OS X 10.9, 10.10, and 10.11, and it should run on OS X versions all the way back to 10.7—support for 10.6 was dropped in the most recent release.

Diskmaker X has actually been around since the days of OS X 10.7 (it was previously known as Lion Diskmaker), and it's still the easiest GUI-based way to go without intimidating newbies. If you're comfortable with the command line, it's still possible to create a disk manually using a Terminal command, which we'll cover momentarily.

Select OS X 10.11 in Diskmaker X, and the app should automatically find the copy you've downloaded to your Applications folder. It will then ask you where you want to copy the files—click 'An 8GB USB thumb drive' if you have a single drive to use or 'Another kind of disk' to use a partition on a larger drive or some other kind of external drive. Choose your disk (or partition) from the list that appears, verify that you'd like to have the disk (or partition) erased, and then wait for the files to copy over. The process is outlined in screenshots above.

The only slightly less-easy way

If you don't want to use Diskmaker X, Apple has actually included a terminal command that can create an install disk for you. Assuming that you have the OS X El Capitan installer in your Applications folder and you have a Mac OS X Extended (Journaled)-formatted USB drive named 'Untitled' mounted on the system, you can create an El Capitan install drive by typing the following command into the Terminal.

sudo /Applications/Install OS X El Capitan.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install OS X El Capitan.app --nointeraction

The command will erase the disk and copy the install files over. Give it some time, and your volume will soon be loaded up with not just the OS X installer but also an external recovery partition that may come in handy if your hard drive dies and you're away from an Internet connection.

Create Macos El Capitan Bootable Usb Windows 7

Whichever method you use, you should be able to boot from your new USB drive either by changing the default Startup Disk in System Preferences or by holding down the Option key at boot and selecting the drive. Once booted, you'll be able to install or upgrade El Capitan as you normally would.

Introduction

Apple officially released OS X 10.11 El Capitan operating system in September 2015 as an update through Apple App Store. This actualization will update core of your system and preserve your user data.

However, if you want to have a clean installation of El Capitan on your Mac you will need to create a special installation USB drive and in this article we will show you how.

Four ways how to create El Capitan USB installation flash drive:

Preparation - get OS X El Capitan installer and USB flash drive

Download El Capitan installer (Install OS X El Capitan.app in Applications folder) available in Mac App Store.

Prepare a flash drive with OS X Disk Utility. Format it with GUID Partition Table and name it as Untitled. The minimal capacity of flash drive must be 8 GB.

How to create El Capitan installation USB drive with createinstallmedia tool

The createinstallmedia is a command line tool distributed with OS X installer.

When you have prepared your USB flash drive and El Capitan installer is downloaded from App Store ► open Terminal and type command:

sudo /Applications/Install OS X El Capitan.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install OS X El Capitan.app --nointeraction

In our case 'Untitled' is the name of USB flash drive! Replace 'Untilled' by name of your flash drive.
Wait a few minutes and your El Capitan installation USB drive will be prepared.

To install OS X El Capitan ► restart computer ► hold the Option key and select Installation USB drive from the menu.

How to create El Capitan USB installation with Terminal commands

When your USB flash drive is ready and El Capitan installer downloaded from App Store ► Open Terminal and type the following sequence of commands:

sudo hdiutil attach /Applications/Install OS X El Capitan.app/Contents/SharedSupport/InstallESD.dmg

sudo asr restore -source /Volumes/OS X Install ESD/BaseSystem.dmg -target /Volumes/Untitled -erase -format HFS+

sudo rm /Volumes/OS X Base System/System/Installation/Packages

sudo cp -a /Volumes/OS X Install ESD/Packages /Volumes/OS X Base System/System/Installation/Packages

sudo cp -a /Volumes/OS X Install ESD/BaseSystem.chunklist /Volumes/OS X Base System

sudo cp -a /Volumes/OS X Install ESD/BaseSystem.dmg /Volumes/OS X Base System

hdiutil detach /Volumes/OS X Install ESD

Now wait until your bootable installation flash drive with OS X 10.11 El Capitan is made.

To install OS X El Capitan ► restart computer ► hold the Option key and select Installation USB drive from the menu.

How to create El Capitan USB installation with Disk Utility and Finder

When your USB flash drive is ready and El Capitan installer downloaded from App Store ► Open Terminal and type:

defaults write com.apple.finder AppleShowAllFiles 1 && killall Finder

This command allows you to view hidden files in Finder.

Now Open Finder ► Applications ► Install OS X El Capitan.app ► right click ► Select Show Package Contents option.

Navigate to Contents/SharedSupport ► Mount InstallESD.dmg file

Open OS X Install ESD archive in Finder and mount BaseSystem.dmg archive

Connect USB drive and open Disk Utility (/Applications/Utilities)

Create macos el capitan bootable usb download

Select the USB drive from the list of disks, select Restore tab and pick Select OS X Base System archive as a source and USB flash drive as the destination. When ready click on Restore button.

After the Restore process is finished, open Finder ► open USB drive (OS X Base System) ► go to the System/Installation folder and select Packages file and delete it.

Bootable Flash Drive Creator

Open OS X Install ESD volume in Finder, select Packages folder and copy them to System/Installation folder on USB drive.

Also copy BaseSystem.chunklist and BaseSystem.dmg files from InstallESD.dmg volume to root of USB flash drive (OS X Base System).

Now your El Capitan installation USB drive is prepared and ready for use.

To install OS X El Capitan ► restart computer ► hold the Option key and select Installation USB drive from the menu.

How to create El Capitan USB installation disk with DiskMaker X

DiskMaker X tool is Wizard like tool that allows you create OS X installation disk. Download DiskMaker X to your Mac and copy it to Applications folder.

When you have prepared your USB flash drive and El Capitan installer is downloaded from App Store ► open DiskMaker X.

Select version of OS X (in our case El Capitan)

Select copy of OS X installation app

Select USB drive that will be used for USB installation

And wait a few minutes till the the DiskMaker X finish creating process.

Create Macos El Capitan Bootable Usb From Windows

To install OS X El Capitan ► restart computer ► hold the Option key and select Installation USB drive from the menu.